Dahua VTO4202FB-P-S2 black IP video intercom camera main module (2-wire connection or network cable)

The Dahua VTO4202FB-P-S2 is a black 2-megapixel Full HD camera module for the 2nd generation Dahua modular IP video doorbell system. This camera module is a main module without a doorbell button and can be connected and powered with a network cable or two-wire cable. The VTO4202FB-P-S2 must be combined with other modules.

Possibilities
The camera has a very wide 168.6-degree horizontal field of view and a 2-megapixel Full HD image sensor. The module is equipped with infrared LEDs for clear visibility in the dark. The VTO4202FB-P-S2 features a microphone and speaker for clear video calls via an indoor monitor or anywhere in the world using the app on your smartphone. The module can be connected to an electric lock or gate, for example, to remotely control a door or gate. The camera module only works with an indoor intercom monitor and can also be used with the smartphone app. Therefore, the VTO4202FB-P-S2 cannot operate standalone without an intercom monitor and with just the app.

Assembly
The Dahua VTO4202FB-P-S2 is made of durable aluminum and plastic and is vandal-resistant (IK07). The complete outdoor station must be combined with a flush-mounted or surface-mounted housing, which can be found under the "Options" tab. The VTO4202FB-P-S2 connects to the network with a network cable and can be powered with 802.3af PoE. The Dahua VTO4202FB-P-S2 can also be connected with a two-wire connection to the Dahua VTNS2003B-2 switch, providing power and connection to the network and an intercom monitor. The appropriate switch is listed under "Options." Cables are not included. Under the "Documentation" tab, you'll find a link to the manufacturer's product page, which includes the manual and sizing documentation, as well as a link to the datasheet with all specifications.

Key Features

• 2 megapixel Full HD CMOS camera
• 168.6 degrees horizontal viewing angle
• Infrared night vision
• Visitors can leave video and audio messages
• Aluminum, splash-proof (IP65, sealing kit required) and vandal-proof (IK07)
• P2P connection, so no port forwarding required
• SIP protocol
• Opening doors remotely
• Alarm output
• Sabotage switch
• Exit button input and door status input
• Built-in NO/NC door relay
• RS485 output for Dahua DEE1010B safety relay (not included)
• 12VDC/100mA output
• Power and signal over 1 network cable (PoE) or two-wire cable
• Surface-mounted or built-in
• Maximum 9 modules

© Text is protected by copyright